Acquista per Marca
  • Acquista per Marca
  • Accusump by Canton
  • ADA
  • Advance Tapes
  • Aerocatch
  • AeroLoc
  • Alpinestars
  • Ampep
  • Anderson
  • AP Racing
  • Arai
  • AST Stop Watches
  • Aurora Rod End Bearings
  • Autoglym
  • Automec Brake Products
  • Avanti
  • AVO-TECHNICS
  • Bell
  • BG Racing
  • Bob Heath
  • Bosch
  • CamLoc
  • Carbon X
  • Cartek
  • Castle Combe Circuit
  • Castrol
  • Coast Fabrications
  • Cobra Seats
  • Cohline
  • Comex
  • Concept Racing
  • Cool It
  • Davies Craig
  • DMS
  • Dow Corning
  • Dunlop
  • Dzus
  • Eibach
  • Facet
  • Faulkner Springs
  • FK Rod Ends
  • FLURO Rod Ends
  • FSE
  • FuelX
  • Gates Vulcoflex
  • Girling
  • GKN
  • Go Pro
  • Gold Plug
  • Goodridge
  • Grayston
  • Grip Tyre Softener
  • Halo by Orthene
  • Hans
  • Hellerman
  • Hot Wire
  • Hunter
  • Hylomar
  • Indi
  • Intercomp
  • ITG
  • J-B Weld
  • Jetex
  • K-Seal
  • Laminova
  • Lifeline
  • Longacre
  • Lucas
  • Lumenition
  • Mann Filters
  • McLube Automotive
  • Mechanix
  • Merlin
  • Millers Oils
  • Mintex
  • Mobil 1 Oil
  • Mocal
  • Momo
  • Monit
  • Mountney
  • National
  • Newton Equipment
  • NGK Spark Plugs
  • NMB Bearings
  • Norma
  • OBP
  • Odyssey
  • Omex
  • OMP
  • P1 Racewear
  • Pagid Brake Pads
  • Peltor
  • Performance Braking
  • Pig
  • Piper
  • Polybush
  • Powervamp
  • Protech Shocks
  • PWR Oil Coolers
  • Racetech
  • Racewear Clearance
  • Rain-X
  • Recoil
  • Red Line
  • Revotec
  • Ringers
  • Samco
  • Schroth
  • Setrab
  • Sikaflex
  • Silkolene
  • Simpson
  • Smiths Gauges
  • SPA Technique
  • Sparco
  • Spax
  • Springalex
  • Stack
  • Stand 21
  • Stant
  • Stilo
  • SUSA
  • Sytec
  • Terratrip
  • Tex Mirrors
  • Thermo-Tec
  • Tickitape
  • Tilton
  • Tripac Fans
  • TRS
  • Valvoline
  • VDO
  • Vitaloni
  • VP Racing
  • Walbro
  • Walero
  • Webcon
  • Willans
  • Wilwood
  • Wipac
  • Zircotec
Back to Knowledge Base

With these Mocal fuel breathers, does it unscrew into 2 pieces, and reassembled sandwiching the fuel tank material between? I'm perplexed how it would be fitted any other way. But if it is as I say, then why is there a hose to be joined on both the top and the bottom.?

That Mocal Tank breather is designed to be fitted in a breather hose rather than the tank itself. We do one which is threaded on the bottom which can be screwed to a tank if a threaded boss is welded to the tank. This Mocal fuel breather has 8mm push on unions each end. The valve screws into the housing which is why it is in two parts.

Archived in: Roll over fuel tank valves

17th March 2014

Does the above Q&A give you the answer you were looking for?