Acquista per Marca
  • Acquista per Marca
  • Accusump by Canton
  • ADA
  • Advance Tapes
  • Aerocatch
  • AeroLoc
  • Alpinestars
  • Ampep
  • Anderson
  • AP Racing
  • Arai
  • AST Stop Watches
  • Aurora Rod End Bearings
  • Autoglym
  • Automec Brake Products
  • Avanti
  • AVO-TECHNICS
  • Bell
  • BG Racing
  • Bob Heath
  • Bosch
  • CamLoc
  • Carbon X
  • Cartek
  • Castle Combe Circuit
  • Castrol
  • Coast Fabrications
  • Cobra Seats
  • Cohline
  • Comex
  • Concept Racing
  • Cool It
  • Davies Craig
  • DMS
  • Dow Corning
  • Dunlop
  • Dzus
  • Eibach
  • Facet
  • Faulkner Springs
  • FK Rod Ends
  • FLURO Rod Ends
  • FSE
  • FuelX
  • Gates Vulcoflex
  • Girling
  • GKN
  • Go Pro
  • Gold Plug
  • Goodridge
  • Grayston
  • Grip Tyre Softener
  • Halo by Orthene
  • Hans
  • Hellerman
  • Hot Wire
  • Hunter
  • Hylomar
  • Indi
  • Intercomp
  • ITG
  • J-B Weld
  • Jetex
  • K-Seal
  • Laminova
  • Lifeline
  • Longacre
  • Lucas
  • Lumenition
  • Mann Filters
  • McLube Automotive
  • Mechanix
  • Merlin
  • Millers Oils
  • Mintex
  • Mobil 1 Oil
  • Mocal
  • Momo
  • Monit
  • Mountney
  • National
  • Newton Equipment
  • NGK Spark Plugs
  • NMB Bearings
  • Norma
  • OBP
  • Odyssey
  • Omex
  • OMP
  • P1 Racewear
  • Pagid Brake Pads
  • Peltor
  • Performance Braking
  • Pig
  • Piper
  • Polybush
  • Powervamp
  • Protech Shocks
  • PWR Oil Coolers
  • Racetech
  • Racewear Clearance
  • Rain-X
  • Recoil
  • Red Line
  • Revotec
  • Ringers
  • Samco
  • Schroth
  • Setrab
  • Sikaflex
  • Silkolene
  • Simpson
  • Smiths Gauges
  • SPA Technique
  • Sparco
  • Spax
  • Springalex
  • Stack
  • Stand 21
  • Stant
  • Stilo
  • SUSA
  • Sytec
  • Terratrip
  • Tex Mirrors
  • Thermo-Tec
  • Tickitape
  • Tilton
  • Tripac Fans
  • TRS
  • Valvoline
  • VDO
  • Vitaloni
  • VP Racing
  • Walbro
  • Walero
  • Webcon
  • Willans
  • Wilwood
  • Wipac
  • Zircotec
Back to Knowledge Base

Is the 20 degree Stand 21 Hans device suitable for single seaters or will I need 30 degree? Do the posts come with the device or are they separate?

A lot of people can use a Stand 21 20 degree Hans, but it depends how you sit in the
car, if you are sat upright 20 degree is fine but if you are leaning back more
you may need a 30 degree/

The posts should be fitted to the helmet already, if you have a helmet
that does not have Hans posts or captive nuts to screw the posts in to,
you will probably need a new helmet.

Archived in: Racing Helmet | Bell Helmet

12th March 2014

Does the above Q&A give you the answer you were looking for?

Related products