Acquista per Marca
  • Acquista per Marca
  • Accusump by Canton
  • ADA
  • Advance Tapes
  • Aerocatch
  • AeroLoc
  • Alpinestars
  • Ampep
  • Anderson
  • AP Racing
  • Arai
  • AST Stop Watches
  • Aurora Rod End Bearings
  • Autoglym
  • Automec Brake Products
  • Avanti
  • AVO-TECHNICS
  • Bell
  • BG Racing
  • Bob Heath
  • Bosch
  • CamLoc
  • Carbon X
  • Cartek
  • Castle Combe Circuit
  • Castrol
  • Coast Fabrications
  • Cobra Seats
  • Cohline
  • Comex
  • Concept Racing
  • Cool It
  • Davies Craig
  • DMS
  • Dow Corning
  • Dunlop
  • Dzus
  • Eibach
  • Facet
  • Faulkner Springs
  • FK Rod Ends
  • FLURO Rod Ends
  • FSE
  • FuelX
  • Gates Vulcoflex
  • Girling
  • GKN
  • Go Pro
  • Gold Plug
  • Goodridge
  • Grayston
  • Grip Tyre Softener
  • Halo by Orthene
  • Hans
  • Hellerman
  • Hot Wire
  • Hunter
  • Hylomar
  • Indi
  • Intercomp
  • ITG
  • J-B Weld
  • Jetex
  • K-Seal
  • Laminova
  • Lifeline
  • Longacre
  • Lucas
  • Lumenition
  • Mann Filters
  • McLube Automotive
  • Mechanix
  • Merlin
  • Millers Oils
  • Mintex
  • Mobil 1 Oil
  • Mocal
  • Momo
  • Monit
  • Mountney
  • National
  • Newton Equipment
  • NGK Spark Plugs
  • NMB Bearings
  • Norma
  • OBP
  • Odyssey
  • Omex
  • OMP
  • P1 Racewear
  • Pagid Brake Pads
  • Peltor
  • Performance Braking
  • Pig
  • Piper
  • Polybush
  • Powervamp
  • Protech Shocks
  • PWR Oil Coolers
  • Racetech
  • Racewear Clearance
  • Rain-X
  • Recoil
  • Red Line
  • Revotec
  • Ringers
  • Samco
  • Schroth
  • Setrab
  • Sikaflex
  • Silkolene
  • Simpson
  • Smiths Gauges
  • SPA Technique
  • Sparco
  • Spax
  • Springalex
  • Stack
  • Stand 21
  • Stant
  • Stilo
  • SUSA
  • Sytec
  • Terratrip
  • Tex Mirrors
  • Thermo-Tec
  • Tickitape
  • Tilton
  • Tripac Fans
  • TRS
  • Valvoline
  • VDO
  • Vitaloni
  • VP Racing
  • Walbro
  • Walero
  • Webcon
  • Willans
  • Wilwood
  • Wipac
  • Zircotec
Back to Knowledge Base

I have a TVR V8S with two exhausts in which I would like to place your Merlin Mufflers. The inside diameter of the exhaust pipe is 60mm. Will the mufflers fit and are they likely to be effective.

Yes those will be a good fit as one option on the mounting tube diameter is 60mm. There have been many TVRs here over the years and the experience is that two Merlin mufflers and the standard TVR exhaust will meet the track day noise limit at Castle Combe Circuit.

Archived in: Jetex exhausts

9th June 2014

Does the above Q&A give you the answer you were looking for?